Engine Oil Acid/Residuum Remover
Engine Oil Acid/Residuum Remover
Product Highlights： Engine Oil Acid/Residuum Remover is a fully synthetic and transparent engine flushing liquid with a strong anti-oxidation capability to effectively remove deposits and pollutants in various engine components such as oil pump, cylinder wall, piston connecting rod, camshaft, crankshaft and crankcase.
- Contains fully synthetic base oil, Alkalescent carbon deposit remover, Friction reduction formula, and Metallic Seal & Rubber protection liquor with the highest temperature re-sistance at 300℃
- Efficiently neutralise acid generated by engine oil burned during combustion stage.
- Tested and verified by SGS in Copper Corrosion, Total Basic Number (TBN), Total Acidi-ty and Lubricant Compatibility.
- Directions of use:
- A 4-cylinder engine can be treated with 1 bottle of the Engine Oil Acid/Residuum Remover. For larger capacity engines, please fill additional amount till the engine oil warning light is off.
- Leave the old oil filter in place, drain the old engine oil then screw back the oil plug.
- Fill the Engine Oil Acid/Residuum Remover in the engine when it is not in a very high temperature.
- Start the engine and leave it at idle speed for no more than 10 mins after filling the Engine Oil Acid/Residuum Remover. Do not press the accelerator of your vehicle during the process.
- Turn off the engine after the flushing process.
- Unscrew the oil plug and drain the Engine Oil Acid/Residuum Remover along with oil sludge. Screw the oil plug back once the process above is finished.
- Replace the the oil filter with a new one, and refill appropriate amount of new en-gine oil. Here the engine flushing process is completed.
- It is recommended to use the Engine Oil Acid/Residuum Remover with every re-placement of engine oil to eliminate acid, residuum and oil sludge.
